ACL Drayton Lifestyle * LP241 - 24 Hour
* LP522 - 5/2 Day
* LP722 - 7 Day
*Automatic summer/winter timechange
*Memory saver - programme and clock never need resetting in the event of loss of power
*Easy to read, backlit screen
*New contemporary design
*Pre-set clock
*On/once/timed/off switching options
*3 timing periods per day
*Programme advance buttons
*All programmers suitable for fully pumped or gravity heating systems
*Dimensions: 93x148x31mm HxWxD
*Part L Compliant (Part J in Scotland)
*Proven reliability
Same backplate and wiring as:
ACL Lifestyle LP112, LS241, LS522, LS722,
Drayton SM2, Tempus 2, Tempus 4, Tempus 6, Tempus 7
British Gas UP1, UP2, EMP2
Barlo EPR1 | Danfoss Randall 102 * 102 - Elecro mechanical 24 hour
* 102E5 5/2 day digital
* 102E7 7 day digital
A range of general-purpose mini-programmers, which provide linked outputs for Water and Heating. The range includes a simple 24 hour electro-mechanical model, plus two electronic models, which offer 5/2 day or 24 hour operation, and a 7 day or 5/2 day operation. All three units fit the GP wallplate and have an identical wiring configuration, allowing systems to be upgraded without the need for rewiring. The electro-mechanical 102 has a thumbwheel, which allows early selection of future switching operations. All models show clearly the current state of the output. The electronic units have extra programmes and overrides and incorporate a battery to provide back up of time and programme. | Switchmaster Programmers • 24 hour programme
• CONSTANT/TIMED/OFF switching options
• Colour coded tappets (once or twice switching)
• Double insulated
• SM400: Suitable for gravity or fully pumped systems
• SM600: Suitable for gravity or fully pumped systems
• SM805: Suitable for fully pumped systems | Danfoss Randall 106 Danfoss 106 programmer with heating or hot water priority. | | Danfoss Randall 3022 FRU Factory Replacement Unit Randall 3022. Note: no backplate included. | | Danfoss Randall 3060 A range of basic electro-mechanical time controls for heating and domestic hot water systems, favoured by Local Authorities nationwide for simplicity of operation. The control modules plug into a separate wallplate/terminal block making installation and servicing as simple as possible. All models feature a 24-hour clock with colour coded On and Off tappets, which are simply moved to the desired position on the dial to provide 2 on and 2 off periods per day. The 3060 can also be used to replace the 3020P using the existing backplate. | | Danfoss Randall 4033 A range of basic electro-mechanical time controls for heating and domestic hot water systems, favoured by Local Authorities nationwide for simplicity of operation. The control modules plug into a separate wallplate/terminal block making installation and servicing as simple as possible. All models feature a 24-hour clock with colour coded On and Off tappets, which are simply moved to the desired position on the dial to provide 2 on and 2 off periods per day. Can be used to replace the Randall 3033 with only a minor wiring change on the backplate. | | Danfoss Randall CP715 Si The CP715 two-channel, common time base programmer has separate Heating and Hot Water outputs, allowing either service to run independently of each other, but sharing a common time base. The CP715 can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and either 2 ON/OFF's or 3 ON/OFF's per day. Additionally the programmer can be set for either 'pumped' or 'gravity' hot water. Additional features such as convenient user overrides, built-in ready-to-use programmes, a day programme copy facility as well as a stylish, compact design and easy to read display make the CP715 the simple answer to all heating and hot water requirements The updated CP715Si model provides:
* Optional service interval timer
* Factory set clock
* Automatic BST / GMT time changes
* Holiday function
* Backlit display Replaces (use existing backplate & wiring): CP15, CP75, CP715 | | Danfoss Randall FP715 Si The FP715 two-channel full programmer has separate Heating and Hot Water outputs operating on completely independent time bases for maximum flexibility. The FP715 can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and to provide either 2 ON/OFF's or 3 ON/OFF's per day. Additionally the programmer can be set for either pumped or gravity hot water. Additional features such as convenient user overrides, built-in ready-to-use programmes, a day programme copy facility as well as a stylish, compact design and easy to read display make the FP715 the simple answer to all heating and hot water requirements. Dimensions: 93x137x29mm HxWxD The updated FP715Si model provides:
* Service interval timer
* Factory set clock
* Automatic BST / GMT time changes
* Holiday function
* Backlit display Replaces (use existing backplate & wiring): FP15, FP75, FP715 | | Danfoss Randall FP975 The FP975 full programmer offers a direct plug-in replacement to the Danfoss Randall MK 9 range (types 922 & 972), the Danfoss Randall 3002, SET 2, SET2E, SET 3, SET3M and SET 5, the Sangamo SET2, or any other timeswitch or programmer based on the British Gas standard wallplate. The FP975 is supplied complete with SET wallplates but are designed to also mount directly onto existing MK 9 wallplates without the need for wiring changes. The unit, which is supplied configured as a SET replacement, can be re-configured as a MK9 replacement by means of a switch on the rear of the unit. Replaces (use existing backplate & wiring):
Danfoss Randall 922, 972, 3002, SET 2, SET2E, SET 3, SET3M, SET 5
Sangamo SET2 | | Honeywell ST9400 * ST9400A - 24 hour
* ST9400C - 7 day
The ST9400C is a two channel 7 day programmer with independent timing for control of heating and hot water zones.
The ST9400C has the new groundbreaking Lone of Text (LoT) display that gives clear plain english Instructions whenever any button or slider is used. This means installers, customers and users can operate all of the controls reliably, without needing to find an instruction manual.
* Large backlit display
* Factory set clock and date
* Automatic Summer/Winter 1 hour time change
* Can be set as 7, 5/2 or 1 day operation
* Up to 3 On/Off periods per day
* Gravity or Fully Pumped system setting
* Holiday button for programme override
* Temporary or permanent override facilities
* Extra hour facility for up to 3 hours of boost or advance
* Choice of 3 different built in programmes
* Programme indicator lights
Replaces (same backplate and wiring):
Honeywell ST712A, ST722A, ST772, ST6300A, C21, C27, ST6200A, ST6400A, ST6450B, ST6400C
| | Honeywell ST699 / ST799 * ST699B - 24 hour
* ST799A - 7 day
* Batteries available for older units
* Newer units have the battery soldered in. Replaces (same backplate and wiring):
Honeywell ST499A
Thorn Microtimer | | Horstmann CentaurPlus * C21 - 24 hour
* C27 - 7 day
* Inexpensive and easy to install
* Gravity or Fully Pumped system setting
* Simple to use
* Part L Compliant
* 3 Amp rated
* Three ON and three OFF periods each day
* Hot water boost
* Central heating advance
* Mains powered with battery back-up
* Programme options: On 24hrs, OFF, All Day or Auto Replaces (same backplate and wiring):
Honeywell C21, C27.
Newlec NLC21, NLC27. | | Horstmann Channel.Plus * H21 - 24 hour
* H27 - 7 day CAN DIRECTLY REPLACE EARLIER H27 / H27XL * 2 Channel, 7 Day Programmer
* 5 Year manufacturers warranty
* Large, easy to follow LCD display
* Backlit display (on button press)
* Pre-Set clock
* Automatic Winter/Summer time changes
* Gravity or Fully Pumped system setting
* Up to 3 on/offs per channel in each 24-hour operation
* One touch programme copying from day to day
* Holiday programme suspends programme for upto 30 days
* 1 or 2 hour boost and advance on each channel
* Mains powered with battery backup
* Voltage free
* Dimensions: 101x163x33mm HxWxD
* Same backplate as Horstmann 425 and 5 series programmers Replaces (same backplate and wiring):
Horstmann 425 Tiara, 425 Diadem, H525, H527
Newlec NL425T, NLH21, NLH27, NLE527
Honeywell ST1501, ST1507, ST1000 | | Horstmann H425 * Tiara - No Lights
* Diadem - With indicator lights 16 programmes available for fully pumped systems, and 10 programmes for gravity HW/pumped CH systems.
Programmes allow permanently ON or OFF, On all day or ON/OFF twice a day. An advance switch gives temporary override without altering settings. The Diadem is ideal for gravity systems and fully pumped systems with spring return zone valves. The Tiara is ideally suited for both gravity systems and fully pumped systems with either zone or mid-position valves. | | Myson MEP 2c * 24hr, 5/2 day or 7 day programming
* Independent timebases
* Easy to read, backlit display
* Pre-set clock
* Automatic Summer/Winder time change
* Advance and extend
* Up to 3 ON/OFFs per day | | Potterton EP programmers * EP2002 - 5/2 day common timebase
* EP3002 - 7 day common timebase
* EP6002 - 7 day independent timebases
* Digital Clock Display
* LED Circuit Indicators
* Built In Programme
* Clock Maintained During Power Failure
* Individual Over-Rides
* EP6002 requires fully pumped system Replaces (same backplate and wiring):
EP2000, EP2001, EP3000, EP3001, EP6000, EP6001 | | Siemens RWB29 *Daily, 5/2 Day or 7 Day Programming
*Two or three ON/OFFs per day
*Independent timing for HW and CH
*Gravity or Fully Pumped systems
*Advance and +3 hour (boost) facilities
*LED 'ON' lamps and user friendly backlit display
*Dimensions: 90x145x34mm HxWxD
*Can be programmed away from its backplate
*Large Screen
*Holiday Programming
*Menu Driven Programming Replaces (same backplate and wiring):
Landis & Gyr (Landis & Staefa)
All 2-channel RWB programmers
All 2-channel Microgyr programmers
Gloworm (Glowworm) MasterMind,
Potterton Miniminder, Miniminder E
Sankey Sunline
Wickes RWB2/6832, RWB200.cw, RWB252.cw, RWB2E.cw, RWB9.cw.
Boss Therm RPF7, RP24, BUP.
British Gas UP1L | | Siemens RWB2E Replaces Landis & Gyr RWB2
* Two ON/OFF periods per day
* 1 hour boost facility
* All day option
* LED 'ON' light
* Dimensions: 145x90x50mm WxHxD
* Override facility
* Gravity or fully pumped | Lockable Programmer Guard * Holes in frame for air-flow
* Lockable
* Comes with 2 keys |
|
